When I first started riding motorcycles, the exhilarating feeling of the wind rushing past me and the thrill of the open road was unlike anything I’d ever experienced. But, just like all motorcycle enthusiasts, I quickly learned the importance of keeping every part of my gear in tip-top shape – especially the helmet visor. Over time, I’ve tried countless methods and products, and now I’m sharing the 11 most powerful ways I’ve found on how to clean a motorcycle helmet visor.
I cannot stress enough how crucial a clean visor is. It’s not just about aesthetics; it’s about safety. A smeared, scratched, or fogged-up visor can drastically reduce your field of vision, putting you at risk on the road. Plus, if you’re anything like me, there’s a certain pride that comes with keeping your gear gleaming. So, let’s dive right into it!
In 2021, there were 5,932 motorcyclists killed in motor vehicle traffic crashes – higher than the 5,506 motorcyclists killed in 2020 and the highest number of motorcyclists killed since FARS started data collection in 1975. as stated on this NHTSA study. Having a clean motorcycle visor in excellent condition is essential for your safety and sure can reduce your risk.
Table: Top 3 Quick Clean Methods
|Basic Wipe Down
|Mild Soap & Water
1. Basic Wipe Down:
For those moments when you’re on the go, a simple wipe down with a soft cloth can do wonders. Always ensure the cloth is clean to avoid adding scratches.
2. Soap Solution:
A mix of mild soap and lukewarm water is my go-to method. Gently wipe the visor with a cloth soaked in the solution, then rinse with cold water.
3. Specialized Cleaners:
There are several products on the market designed specifically for helmet visors. I’ve tested many, and this is of my top picks.
4. Baby Wipes:
Believe it or not, the gentle formula in baby wipes can help clean without causing damage.
5. Toothpaste (Non-gel):
Apply a small amount to minor scratches, gently rub in a circular motion, then rinse off. This method can help diminish light scratches.
6. Vinegar Solution:
Mix equal parts white vinegar and water. Spray or gently wipe it on the visor. This is especially good for water spots.
7. Baking Soda:
For those tough, grimy spots, make a paste of baking soda and water, apply it to the visor, let it sit for a few minutes, then rinse off.
8. Microfiber Cloths:
These cloths are a godsend! They’re soft and won’t scratch your visor. Plus, they effectively pick up dirt and grime. Included in the Muc-off visor kit.
9. Avoid Paper Towels:
It’s not a cleaning method per se, but it’s worth noting. Paper towels can be abrasive, leading to small scratches.
10. UV Protectant Spray:
After cleaning, using a UV protectant can help shield the visor from the sun’s damaging rays. It not only cleans but adds a layer of protection.
11. Regular Maintenance:
Remember, regular cleaning can extend the life of your visor.
Q1: How often should I clean my motorcycle helmet visor?
A1: It largely depends on how frequently you ride. If you’re a daily rider, a quick wipe down daily with a thorough clean weekly is a good rule of thumb.
Q2: Can I use household window cleaners on my visor?
A2: Be cautious! Some window cleaners contain chemicals that can damage the protective coating on your visor.
Q3: My visor has a permanent mark. Should I replace it?
A3: If the mark obstructs your vision or is a deep scratch, it’s safer to opt for a replacement.
Cleaning your motorcycle helmet visor might seem like a simple task, but the right techniques can make a world of difference. Not only will your visor look pristine, but you’ll also enjoy an unobstructed view, ensuring your rides are both safe and enjoyable. Now that you’re well-equipped with these 11 powerful cleaning methods, there’s no excuse for a dirty visor!
Feeling inspired to give your entire helmet a fresh makeover? Don’t stop at the visor! Dive into this comprehensive guide on helmet maintenance and cleaning for a complete helmet transformation!
Meet Simon, the 46-year-old aficionado behind YourMotoBro. With a lifelong passion ignited by motocross dreams and a Canadian Tire bicycle, Simon’s journey has been nothing short of extraordinary. From coaching underwater hockey to mastering muddy terrains, he’s an authority in thrill and adventure. Certified as an Off-Road Vehicle Excursion Guide and trained in Wilderness First Aid, Simon’s love for bikes is as diverse as his collection—from a robust BMW GSA R1200 to the memories of a Harley Davidson Night Train. By day a respected telephony consultant, by night a motorcycle maestro, Simon’s tales are a blend of expertise, resilience, and undying passion. ?️✨